Low Concentration Sulfolane-Based Electrolyte for High Voltage Lithium Metal Batteries

Electrolyte engineering is crucial for the commercialization of lithium metal batteries. Here, lithium metal is stabilized in the highly reactive sulfolane-based electrolyte under low concentration (0.25 M) for the first time. Inorganic-polymer hybrid solid electrolyte interphase (SEI) with high ionic conductivity, low bonding with lithium and high flexibility enables dense chunky lithium deposition and high plating/stripping efficiency. Low concentration electrolyte (LCE) also enables excellent cycling stability of LiNi_0.5Co_0.2Mn_0.3O₂ (NCM523)/Li cells at 1 C (90.7 % retention after 500 cycles) and 0.3 C (83.3 % retention after 1000 cycles). With a low N/P ratio (≈2), the capacity retention for NCM523/Li cells can achieve 94.3 % after 100 cycles at 0.3 C. Exploring the LCE is of paramount significance because it provides more possibilities of the lithium salt selections, especially reviving some lithium salts that are excluded before due to their low solubility. More importantly, LCE has the significant advantage of commercialization due to its cost-effectiveness.     

Qualitative identification and quantitative comparison of Physochlainae Radix from different regions based on chemometric methods

Physochlainae Radix (PR) is an essential herbal medicine that has been generally applied for treating cough and asthma. In this study, a comprehensive strategy for quality evaluation of PR from different origins was established by integrating qualitative identification, quantitative analysis, and chemometric methods. A total of 58 chemical components were identified by ultra-high-performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry (UHPLC-Q-TOF-MS/MS), and a sensitive and rapid UHPLC-QqQ-MS/MS method was established for the simultaneous determination of 12 compounds. In addition, multivariate statistical analysis was applied for discriminant analysis to compare the differences among 30 batches of PR samples. The results showed that the 30 batches of PR collected from four provinces could be clustered into three categories, in which scoparone, protocatechuic acid, tropic acid, and scopolin were important components to distinguish the primary and non-primary producing areas, as well as superior and inferior products of PR. Chemometric results were consistent and validated each other, and systematically explained the intrinsic quality characteristics of PR. This study first demonstrated that LC-MS combined with multivariate statistical analysis, provided a comprehensive and effective means for quality evaluation of PR.     

Extraction and isolation of diphenylheptanes and flavonoids from Alpinia officinarum Hance using supercritical fluid extraction followed by supercritical fluid chromatography

In this paper, an off-line combination method of supercritical fluid extraction and supercritical fluid chromatography was developed for the selective extraction and isolation of diphenylheptanes and flavonoids from Alpinia officinarum Hance. The enrichment of target components was successfully achieved using supercritical fluid extraction with the following conditions (8% ethanol as co-solvent at 45°C and 30 MPa for 30 min). Taking full advantage of the complementarity of supercritical fluid chromatography stationary phases, a two-step preparative supercritical fluid chromatography strategy was constructed. The extract was firstly divided into seven fractions on a Diol column (250 × 20 mm internal diameter, 10 μm) within 8 min by gradient elution increasing from 5% to 20% modifier (methanol) at 55 ml/min and 15 MPa. Then the seven fractions were separated by using a 1-AA or a DEA column (250 × 19 mm internal diameter, 5 μm) at 50 ml/min and 13.5 MPa. This two-step strategy showed superior separation ability for structural analogs. As a result, seven compounds, including four diphenylheptanes and three flavonoids with high purity, were successfully obtained. The developed method is also helpful for the extraction and isolation of other structural analogs of traditional Chinese medicines.     

自下而上法制备金-介孔二氧化硅复合纳米管用作还原4-硝基苯酚的催化剂

采用自下而上方法制备了金-介孔二氧化硅复合纳米管,其中金纳米粒子作为催化剂嵌在介孔二氧化硅纳米管管壁内侧。金纳米颗粒的团聚、脱落和晶粒尺寸生长都可以被有效限制,而且催化剂负载量和尺寸大小均可实现简单控制。管壁中的介孔孔道、纳米管末端开口以及一维中空管道可以协同促进反应物扩散,从而提高4-硝基苯酚还原反应活性。循环实验证明这种复合纳米管催化剂具有良好的可重复使用性,而且在反应过程中未出现金纳米粒子脱落或团聚现象。     

后处理工艺制备多级孔Ti-BEA沸石及其环氧化催化性能

基于脱铝多级孔BEA沸石与二氯二茂钛的固相反应,开展了钛掺杂量可调的多级孔Ti-beta后处理工艺制备研究.对制备的多级孔Ti-beta样品的理化性质进行了表征,包括X射线衍射、氮气吸附脱附测试、扫描电镜、透射电镜、紫外可见吸收光谱和紫外拉曼光谱等.结果表明,多级孔BEA沸石具有较好的化学稳定性,脱铝-钛化的后处理过程未对样品多级孔结构产生明显影响. 以环己烯和十二烯的烯烃环氧化为探针反应表征了合成多级孔Ti-beta与纯相微孔Ti-beta沸石的催化性能.结果表明,在小分子环己烯的环氧化反应中,多级孔Ti-beta沸石的催化活性(转化率59.4%)与微孔Ti-beta相当(转化率57.9%);但是在较大分子十二烯的催化反应中,多级孔结构Ti-beta材料的催化性能(转化率11.1%)明显优于纯相微孔材料(转化率6.8%),且产物中环氧化物选择性更高(分别为60.3%和37.8%).     

Bioactive Trichothecenes Produced by the Myrothecium sp. QB‐1

Three new simple trichothecenes, 15‐acetyltrichoverrol B ( 3 ), 13′‐acetyltrichoverrin B ( 5 ), and 6′‐dehydroxytrichoverrin B ( 6 ), along with five known trichothecenes trichodermadienediol B ( 1 ), trichoverrol B ( 2 ), trichoverrin B ( 4 ), and roridins A ( 7 ) and D ( 8 ), have been isolated from the liquid culture of Myrothecium roridum (strain no. QB‐1). The structures of the new compounds were established by comprehensive analysis of 1D‐ and 2D‐NMR data. All the compounds were evaluated for antifungal activity, only compounds 7 and 8 showed significant antifungal activity against the tested fungi (MIC ranged from 10 to 5 μg/ml).     

Determination of Sunset Yellow using a carbon paste electrode modified with a nanostructured resorcinol-formaldehyde resin

This article describes an electrochemical sensor for the dye additive Sunset Yellow (SY). It consists of a carbon paste electrode modified with nanostructured resorcinol-formaldehyde (RF) resin. The RF resin warrants strong signal enhancement and a strongly increased oxidation peak currents of SY at 0.66 V (vs. SCE). The effects of pH value, amount of RF polymer, accumulation potential and time were optimized. The sensor has a linear response to SY in the 0.3 to 125 nM concentration range, and the limit of detection is 0.09 nM after a 2-min accumulation time. The electrode was applied to the analysis of samples of wastewater and drinks, and the results are consistent with those obtained by HPLC.

Nanostructured resorcinol-formaldehyde (RF) resin was prepared and used as a material for electrochemical determination of Sunset Yellow.

     

铑催化苯醌磺酰化反应合成磺酰基醌类衍生物

报道了一种过渡金属铑催化的醌类与磺酰氯化合物的偶联反应,实现了醌类的磺酰化反应.在温和的反应条件下,以较高的产率成功合成了一系列具有生物活性的磺酰基醌类化合物,此反应不仅对苯醌具有较好的适应性,对于萘醌底物也能取得较高的产率,并提出了初步的反应机理.